Implementing Own Capabilities

Each Channel has a list of capabilities that can be performed in it, such as muting a user, deleting messages and many others. Not all channels should have the same capabilities neither should all users, which is where own capabilities come into play.

Inside of Channel you will find a property with a signature ownCapabilities: Set<String>. Which channel capabilities this set contains depends on the current user’s role (for example admin, guest, etc.), the channel type (for example messaging, livestream, etc.) and channel level settings. You can read more about channel capabilities here and more about channel level settings here.

Integrating channel capabilities into the UI

If you are using our bound UI components in combination with our ViewModels, then own capabilities work out of the box without any additional effort from your side, otherwise you will have to pass the correct set of capabilities to individual components.

Different components have different ways of passing own capabilities to them, so we’ll go through them individually. Capabilities that were a part of the minimal chat experience before the introduction of own capabilities will be highlighted in bold with an asterisk next to them.

MessageComposer

@Composable
public fun MessageComposer(
    messageComposerState: MessageComposerState,
    ..., // State, handlers and content slots
    integrations: @Composable RowScope.(MessageComposerState) -> Unit = {
        // Default content, uses own capabilities to regulate integrations
    },
    trailingContent: @Composable (MessageComposerState) -> Unit = {
        // Default content, uses own capabilities to regulate the send button
    },
)

The file containing MessageComposer can be found here.

MessageComposer contains a parameter messageComposerState: MessageComposerState. This class holds all the necessary state to make MessageComposer work, including a set of own capabilities. These are used by the default components hosted in the MessageComposer.

Let’s take a look at MessageComposerState:

public data class MessageComposerState(
    ..., // State
    val ownCapabilities: Set<String> = setOf()
)

The file containing MessageComposerState can be found here.

MessageComposer regulates the following capabilities:

• send-message *
• send-links *
• upload-file *

SelectedMessageMenu

@Composable
public fun SelectedMessageMenu(
    message: Message,
    messageOptions: List<MessageOptionItemState>,
    ownCapabilities: Set<String>,
    ..., // Handlers and customization options
    headerContent: @Composable ColumnScope.() -> Unit = {
        // Default content, uses own capabilities to regulate sending reactions
    },
    centerContent: @Composable ColumnScope.() -> Unit = {
        // Default content
    },
)

The file containing SelectedMessageMenu can be found here.

SelectedMessageMenu regulates the following capability:

• send-reaction *

More capabilities can be regulated by creating the appropriate list of message options. You can use the following function provided by the SDK to do so:

@Composable
public fun defaultMessageOptionsState(
    selectedMessage: Message,
    currentUser: User?,
    isInThread: Boolean,
    ownCapabilities: Set<String>,
): List<MessageOptionItemState>

This function uses ownCapabilities to produce the correct list of MessageOptionItemState.

defaultMessageOptionsState regulates the following capabilities:

• send-reply *
• pin-message
• delete-any-message
• delete-own-message *
• update-any-message
• update-own-message *

SelectedReactionsMenu

@Composable
public fun SelectedReactionsMenu(
    message: Message,
    currentUser: User?,
    ownCapabilities: Set<String>,
    ..., // Handlers and customization options
    headerContent: @Composable ColumnScope.() -> Unit = {
        // Default content, uses own capabilities to regulate sending reactions
    },
    centerContent: @Composable ColumnScope.() -> Unit = {
        // Default content
    },
)

The file containing SelectedReactionsMenu can be found here.

SelectedReactionsMenu menu regulates the following capability:

• send-reaction *

SelectedChannelMenu

@Composable
public fun SelectedChannelMenu(
    selectedChannel: Channel,
    ..., // State, handlers and content
    centerContent: @Composable ColumnScope.() -> Unit = {
        // Default content, uses own capabilities to regulate
        // deleting and leaving channels
    },
)

The file containing SelectedChannelMenu can be found here.

SelectedChannelMenu contains a Channel value. It uses the ownCapabilities property contained by that Channel value to leverage own capabilities inside the default center content.

SelectedChannelMenu regulates the following capabilities:

• leave-channel *
• delete-channel

Other capabilities

There are channel capabilities which are not implemented in the SDK because we do not offer the corresponding components or the functionality. You can implement these yourself after creating the correct components.

These are as follows:

• freeze-channel
• set-channel-cooldown
• search-message
• update-channel
• update-channel-members
• ban-channel-members

Additionally, the capability ‘send-typing-events*’ is implemented in our MessageComposerController used by our MessageComposerViewModel. Please keep this in mind should you wish to not use our ViewModels.

How capabilities affect the UI

Let’s take MessageComposer into consideration. If we left it with the default, empty set of own capabilities we would get the following result:

This leaves the user unable to perform any action provided by the composer. Ideally, you should let your Dashboard App settings regulate capabilities, but if you wish to control them manually, you can do so.

Take a look at the object called ChannelCapabilities:

public object ChannelCapabilities {
    /** Ability to ban channel members. */
    public const val BAN_CHANNEL_MEMBERS: String = "ban-channel-members"
    ... // Other capabilities
}

The file containing ChannelCapabilities can be found here.

This object contains all relevant channel capabilities as type safe properties. You can use the properties to build a set containing only the capabilities you want enabled for the user.

If you were to enable the user to send messages, links and attachments, you would build a set as follows:

val customOwnCapabilities = setOf(
    ChannelCapabilities.SEND_MESSAGE,
    ChannelCapabilities.SEND_LINKS,
    ChannelCapabilities.UPLOAD_FILE
)

Then use it to create MessageComposerState:

val messageComposerState = MessageComposerState(
    ownCapabilities = customOwnCapabilities
)

And finally pass the MessageComposerState to the stateless MessageComposer component:

public fun MessageComposer(
    messageComposerState = messageComposerState,
    ..., // State, handlers and content.
)

This enables the following capabilities:

• send-message *
• send-links *
• upload-file *

And results in MessageComposer having the following appearance: